"

快三平台app✳️【bb01.cn】是亚洲最大自主品牌游戏平台,快三平台app,百万大奖等您来拿,注册就可以领取各种活动优惠,快三平台app,无需申请自动到账!

<strike id="tkrjt"><bdo id="tkrjt"></bdo></strike>

    <th id="tkrjt"></th>

    <th id="tkrjt"><big id="tkrjt"></big></th>

    <tbody id="tkrjt"><pre id="tkrjt"></pre></tbody>
    <rp id="tkrjt"></rp>

    <tbody id="tkrjt"><track id="tkrjt"></track></tbody>
  • <button id="tkrjt"><object id="tkrjt"><input id="tkrjt"></input></object></button>

    <ol id="tkrjt"><object id="tkrjt"></object></ol>

  • "
    • 021-61310576
    您的位置: 首页 > 新闻中心 > 泵技术知识

    进口 欧洲水泵生产标准EN

    作者:美国Garcia加西亚 日期:2019-12-11 点击:772

    编号

    中文名称

    英文名称

    CR 13930-2000

    旋转动力泵 泵的进口部分设计 泵的安装建议

    Rotodynamic pumps - Design of pump intakes - Recommendations for installation of pumps

    CR 13931-2000

    旋转动力泵 法兰离心、混流和轴流泵的力和力矩 水平和垂直轴

    Rotodynamic pumps - Forces and moments on flanges centrifugal, mixed flow and axial flow pumps - Horizontal and vertical shafts

    CR 13932-2000

    旋转动力泵 管道系统的进口和出口管件建议书

    Rotodynamic pumps - Recommendations for fitting of inlet and outlet on piping

    EN 1012-1-1996

    压缩机和真空泵 安全要求 第1部分:压缩机

    Compressors and vacuum pumps - Safety requirements - Part 1: Compressors

    EN 1012-2-1996

    压缩机和真空泵 安全要求 第2部分:真空泵

    Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

    EN 1028-1-2002

    消防泵 带起动器的消防离心泵 第1部分:分类 一般和安全要求

    Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification; General and safety requirements

    EN 1028-2-2002

    消防泵 带起动器的消防离心泵 第2部分:一般和安全要求的验证

    Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements

    EN 1076-1997+AC-1997

    工场环境 测定气体和蒸气用的泵吸附管 要求和试验方法

    Workplace atmospheres - Pumped sorbent tubes for the determination of gases and vapours - Requirements and test methods

    EN 1151-1999

    泵 旋转动力泵 家用热水安装和供热安装用的电效应不超过200W 的循环泵 要求、测试快三平台app、标志

    Pumps - Rotodynamic pumps - Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations - Requirements, testing, marking

    EN 12055-1998

    带电驱动压缩机的液体冷却设备和热泵 冷却模式 定义、试验和要求

    Liquid chilling packages and heat pumps with electrically driven compressors - Cooling mode - Definitions, testing and requirements

    EN 12157-1999

    涡轮泵 机床冷却泵组 额定流量和尺寸

    Rotodynamic pumps - Coolant pumps units for machine tools - Nominal flow rate, dimensions

    EN 12162-2001

    液体泵 安全要求 流体静压试验程序

    Liquid pumps - Safety requirements - Procedure for hydrostatic testing

    EN 12262-1998

    旋动式泵 技术文件 术语、输出范围、设计

    Rotodynamic pumps - Technical documents - Terms, delivery range, layout

    EN 12263-1998

    制冷系统和加热泵 限压安全开关装置 要求和试验

    Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests

    EN 12284-2003

    制冷系统和加热泵 阀门 要求、试验和标志

    Refrigerating systems and heat pumps - Valves - Requirements, testing and marking

    EN 12309-1-1999

    净热输入不超过70kW的燃气吸热和吸热式空调和/或加热泵装置 第1部分:安全性

    Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 1: Safety

    EN 12309-2-2000

    净热输入不超过70kW的燃气吸热和吸热式空调和/或加热泵装置 第2部分:能量的合理使用

    Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 2: Rational use of energy

    EN 1232-1997

    工作场所空气 化学试剂的个人抽样用泵 要求和试验方法

    Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods

    EN 12462-1998

    生物技术 泵性能标准

    Biotechnology - Performance criteria for pumps

    EN 12483-1999

    液体泵 带频率转换器的泵设备 保证和兼容性试验

    Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests

    EN 12514-1-2000

    燃油咀炉供油系统用的装置 第1部分:安全要求和试验 零部件快三平台app、输油泵、控制和安全装置、油罐

    Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks

    EN 12639-2000+AC-2000

    液体泵和泵送装置 噪音试验规程 精度2级和3级

    Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy

    EN 12723-2000

    液泵 泵和设备的通用术语 定义、参数快三平台app、字母符号和单位

    Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units

    EN 12919-1999

    工厂环境 体积流速大于5L/min的化学药剂采样泵 要求与试验方法

    Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods

    EN 13136-2001

    制冷系统和加热泵 压力释放设备及相关管道 计算方法

    Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation

    EN 13275-2000

    低温容器 低温设备用泵

    Cryogenic vessels - Pumps for cryogenic service

    EN 13313-2001

    制冷系统和加热泵 工作人员能力

    Refrigerating systems and heat pumps - Competence of personnel

    EN 13951-2003

    液泵 安全要求 粮食加工设备 保证使用中的卫生保健设计规程

    Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use

    EN 14275-2003

    汽车燃料 汽油和柴油燃料质量的评定 从零售泵和商品燃料售货机取样

    Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers

    EN 1736-2000

    制冷系统和热泵 软管元件 振动隔离器和伸缩接头 要求快三平台app、设计和安装

    Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation

    EN 1861-1998

    制冷系统和热泵 系统流程图和管道及仪表图表 平面图和符号

    Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols

    EN 1947-2002

    消防软管 水泵及车辆用半刚性输送水软管组装件

    Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles

    EN 225-1987

    雾化油燃烧器 旋转轴和外部驱动泵 尺寸

    Atomizing oil burners. Pumps with rotating shaft and external drive; Dimensions

    EN 22858-1993

    端吸离心泵(额定压强16巴) 标记、性能和尺寸

    End-suction centrifugal pumps (rating 16 bar)-Designation, nominal duty point and dimensions (ISO 2858:1975)

    EN 23661-1993

    端吸离心泵 底座尺寸和安装尺寸

    End-suction centrifugal pumps- Baseplate and installation dimensions (ISO 3661:1977)

    EN 255-1-1997

    带电驱动压缩机的空调器、液体制冷设备和热力泵 加热方式 第1部分:术语快三平台app、定义和标识

    Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 1: Terms, definitions and designations

    EN 255-2-1997

    带电驱动压缩机的空调器、液体制冷设备和热力泵 加热方式 第2部分:对空间加热装置作标志用测试和要求

    Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 2: Testing and requirements for marking for space heating units

    EN 255-3-1997

    带电驱动压缩机的空调器、液体制冷设备和热力泵 加热方式 第3部分:对卫生间热水装置作标志的测试和要求

    Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing and requirements for marking for sanitary hot water units

    EN 255-4-1997

    带电驱动压缩机的空调器、液体制冷设备和热力泵 加热方式 第4部分:空间加热装置和卫生间热水装置的要求

    Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 4: Requirements for space heating and sanitary hot water units

    EN 378-1-2000

    制冷系统和热泵 安全和环境要求 第1部分:基本要求快三平台app、定义快三平台app、分类和选择准则

    Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria

    EN 378-2-2000

    制冷系统和热泵 安全和环境要求 第2部分:设计快三平台app、结构、测试快三平台app、标志和文件

    Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation

    EN 378-3-2000

    制冷系统和热泵 安全和环境要求 第3部分:安装位置和人身?;?/span>

    Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection

    EN 378-4-2000

    制冷系统和热泵 安全和环境要求 第4部分:操作、维护、修理和恢复

    Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery

    EN 45510-5-4-1998

    发电站设备采购指南 第5-4部分:.水力涡轮机、水力、液力存储器泵和涡轮泵

    Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage, pumps and pump-turbines

    EN 45510-6-4-1999

    发电站设备采购指南 第6-4部分:涡轮机辅助设备 泵

    Guide for procurement of power station equipment - Part 6-4: Turbine auxiliaries - Pumps

    EN 50216-7-2002

    电源变压器及电抗器配件 第7部分:变压器油的电泵

    Power transformer and reactor fittings - Part 7: Electric pumps for transformer oil

    EN 60041-1994

    测定水轮机、蓄能泵和水泵-水轮机水力性能的现场验收试验

    Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines (IEC 60041:1991, modified)

    EN 60193-1999

    水轮机快三平台app、蓄能泵和水泵水轮机 模型验收试验

    Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests (IEC 60193:1999)

    EN 60335-2-40-2003

    家用和类似用途电器 安全 第2-40部分:电热泵、空调器和去湿机的特殊要求 

    Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:2002, modified) / Note: Endorsement notice*To be amended by EN 60335-2-40/prAB (2003-0

    EN 60335-2-40/prA2-2003

    家用和类似用途电器的安全 第2-40部分:电动热泵快三平台app、空调器和去湿机的特殊要求 修改prA2

    Amendment 2 to IEC 60335-2-40, Ed. 4.0: Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers containing flammable refrigerants

    EN 60335-2-41-2003

    家用和类似用途电器的安全 第2-41部分:温度不超过35℃的液体泵的特殊要求 

    Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps (IEC 60335-2-41:2002) / Note: Endorsement notice

    EN 60335-2-51-2003

    家用和类似用途电器的安全 第2-51部分:加热和供水设施用固定式循环泵的特殊要求 

    Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations (IEC 60335-2-51:2002) / Note: Endorsement notice

    EN 60601-2-24-1998

    医疗电气设备 第2-24部分:输液泵和控制器的特殊安全要求

    Medical electrical equipment - Part 2-24: Particular requirements for the safety of infusion pumps and controllers (IEC 60601-2-24:1998)

    EN 60609-2-1999

    水轮机蓄能泵和水泵水轮机气蚀损坏的评定 第2部分:水斗式水轮机的评定

    Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines - Part 2: Evaluation in Pelton turbines (IEC 60609-2:1997)

    EN 60994-1992

    水力机械(水轮机、蓄水泵和水轮泵)振动和脉动的现场测量指南

    Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) (IEC 60994:1991)

    EN 61290-6-1-1998

    光纤放大器 基本规范 第6-1部分:泵浦泄漏参数的试验方法 光解复用器

    Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer (IEC 61290-6-1:1998)

    EN 61702-1999

    直接耦合光伏水泵系统的额定值

    Rating of direct coupled photovoltaic (PV) pumping systems (IEC 61702:1995)

    EN 733-1995

    带支承架的额定值为10bar的端吸式离心泵 公称负荷点、主要尺寸和命名系统

    End-suction centrifugal pumps, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system

    EN 734-1995

    侧槽泵PN40 公称负荷点、主要尺寸和命名系统

    Side channel pumps PN 40 - Nominal duty point, main dimensions, designation system

    EN 735-1995

    旋转动态泵的总体尺寸 公差

    Overall dimensions of rotodynamic pumps - Tolerances

    EN 752-6-1998

    室外建筑物的排水系统 第6部分:泵送装置

    Drain and sewer systems outside buildings - Part 6: Pumping installations

    EN 809-1998+AC-2002

    液体用泵和泵元件 一般安全要求

    Pumps and pump units for liquids - Common safety requirements

    EN 814-1-1997

    带有电驱动压缩机的热泵和空调器 制冷模型 第1部分:术语、定义和名称

    Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 1: Terms, definitions and designations

    EN 814-2-1997

    带有电驱动压缩机的热泵和空调器 制冷模型 第2部分:测试和标志要求

    Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 2: Testing and requirements for marking

    EN 814-3-1997

    带有电驱动压缩机的热泵和空调器 制冷模型 第3部分:要求

    Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 3: Requirements

    EN ISO 14847-1999

    回转容积泵 技术条件

    Rotary positive displacement pumps - Technical requirements (ISO 14847:1999)

    EN ISO 15083-2003

    小艇 舱底排水泵送系统

    Small craft - Bilge pumping systems (ISO 15083:2003)

    EN ISO 15136-1-2001

    石油和天然气的井下设备 人工升降梯的空腔泵系统 第1部分:泵

    Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2001)

    EN ISO 15783-2003

    未密封的旋转动态泵 II级 规范 

    Seal-less rotodynamic pumps - Class II - Specification (ISO 15783:2002)

    EN ISO 16017-1-2000

    室内快三平台app、周围和工作场所空气 用吸附管/热解吸/毛细管气相色谱法作挥发性有机化合物的取样及分析 第1部分:

    Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000)

    EN ISO 16330-2003

    往复式正排量泵和泵送装置 技术条件

    Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003)

    EN ISO 5198-1998

    离心泵、混流泵和轴流泵 液压性能试验规范 精密级

    Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987)

    EN ISO 5199-2002

    离心泵技术条件】烊教╝pp、蚶?/span>

    Technical specifications for centrifugal pumps - Class II (ISO 5199:2002)

    EN ISO 7886-2-1997

    一次性使用无菌皮下注射器 第2部分:带动力驱动注射泵的注射器

    Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1996)

    EN ISO 8849-2003

    小艇 电动直流舱底泵

    Small craft - Electrically operated direct-current bilge-pumps (ISO 8849:2003)

    EN ISO 9905-1997

    离心泵技术条件 I类

    Technical specifications for centrifugal pumps - Class I (ISO 9905:1994)

    EN ISO 9906-1999

    回转动力泵 液压性能验收试验 等级1和2

    Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 (ISO 9906:1999)

    EN ISO 9908-1997

    离心泵技术条件 III类

    Technical specifications for centrifugal pumps - Class III (ISO 9908:1993)

    ENV 12102-1996

    带电驱动压缩机的空调、热泵和除湿器 空气噪音的测量 声功率级的测定

    Air conditioners, heat pumps and dehumidifiers with electrically driven compressors - Measurement of airborne noise - Determination of the sound power level

    prEN 12178-2003

    制冷系统和热泵 液面指示装置的要求、试验和标志

    Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking

    prEN 12255-2-1995

    废水处理厂 第2部分:生废水泵送装置的性能要求

    Wastewater treatment plants - Part 2: Performance requirements of raw wastewater pumping installations

    prEN 12259-12-2000

    固定消防系统 喷水器和喷水系统构件 第12部分:洒水器泵

    Fixed firefighting systems - Components for sprinkler and water spray systems - Part 12: Sprinkler pumps

    prEN 12693-1996

    制冷系统和热泵 安全和环境要求 制冷压缩机

    Refrigerating systems and heat pumps - Safety and environmental requirements - Refrigerant compressors

    prEN 13386-1998

    液泵 潜水泵和泵部件 特殊安全要求

    Liquid pumps - Submersible pumps and pump units - Particular safety requirements

    prEN 14276-1-2001

    热泵和冷却系统的压力设备 容器 一般要求

    Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels; General requirements

    prEN 14343-2003

    容积泵 验收性能试验

    Rotary positive displacement pumps - Performance tests for acceptance

    prEN 14466-2002

    消防泵 便携泵 试验快三平台app、性能要求和安全

    Fire fighting pumps - Portable pumps - Safety and performance requirements, tests

    prEN 255-6-1992

    热力泵 用于加热或加热和制冷的带电驱动压缩机热力泵组 第6部分:用于加热卫生间热水的热力泵组 测试、

    Heat pumps; heat pump units with electrically driven compressors used for heating or for heating and cooling; part 6: heat pump units for heating sanitary water; testing, definitions and requirements for marking

    prEN 255-7-1992

    热力泵 带电驱动压缩机的热力泵组 第7部分:用于加热卫生间热水的热力泵组和热力泵 空中噪音的测量 噪

    Heat pumps; heat pump units with electrically driven compressors; part 7: heat pump units and heat pumps for heating sanitary water; measurements of airborne noise; determination of the sound power level

    prEN 255-8-1992

    热力泵 带电驱动压缩机的热力泵组 第8部分:用于加 热卫生间热水的热力泵组和热力泵 要求

    Heat pumps; heat pump units with electrically driven compressors; part 8: heat pump units and heat pumps for heating sanitary water; requirements

    prEN 50216-10-4-1996

    电源变压器及电抗器配件 第10-4部分:冷却设备 变压器油的电泵

    Power transformer and reactor fittings - Part 10: Cooling equipment - Section 4: Electric pumpsets for transformer oil

    prEN ISO 14617-9-2002

    图表用图形符号 第9部分:泵、压缩机和风扇

    Graphical symbols for diagrams - Part 9: Pumps, compressors and fans (ISO/FDIS 14617-9:2002)

    prHD 395.2.24 S1-1992

    医用电气设备 第2部分:输液泵和控制器安全性的特殊要求

    Medical electrical equipment; part 2: particular requirements for safety of infusion pumps and controllers (IEC 62D(CO)61)

    相关文章标准

    进口德国泵生产DIN 标准http://www.assassingrl.com/newsdetail_1983242.html

    进口英国泵生产BS标准http://www.assassingrl.com/newsdetail_1981762.html

    进口美国泵ANSI标准http://www.assassingrl.com/newsdetail_1981149.html

    世界各国阀门标准代号http://www.assassingrl.com/newsdetail_1979672.html

    进口,液压气动生产标准http://www.assassingrl.com/newsdetail_1983267.html

    分享到:

    上一条:进口低温阀门性能测试装置电脑数据采集

    下一条:进口,液压气动生产标准

    快三平台app
    <strike id="tkrjt"><bdo id="tkrjt"></bdo></strike>

    <th id="tkrjt"></th>

    <th id="tkrjt"><big id="tkrjt"></big></th>

    <tbody id="tkrjt"><pre id="tkrjt"></pre></tbody>
    <rp id="tkrjt"></rp>

    <tbody id="tkrjt"><track id="tkrjt"></track></tbody>
  • <button id="tkrjt"><object id="tkrjt"><input id="tkrjt"></input></object></button>

    <ol id="tkrjt"><object id="tkrjt"></object></ol>