"

彩票在线平台登录网站✳️【bb01.cn】是亚洲最大自主品牌游戏平台,彩票在线平台登录网站,百万大奖等您来拿,注册就可以领取各种活动优惠,彩票在线平台登录网站,无需申请自动到账!

  • <dd id="prc1i"><big id="prc1i"></big></dd>
    <dd id="prc1i"><track id="prc1i"></track></dd>
    <rp id="prc1i"><acronym id="prc1i"></acronym></rp>
  • <tbody id="prc1i"><noscript id="prc1i"></noscript></tbody>
    <span id="prc1i"><track id="prc1i"><sup id="prc1i"></sup></track></span>

    1. <span id="prc1i"><pre id="prc1i"><sup id="prc1i"></sup></pre></span>

    2. <rp id="prc1i"><ruby id="prc1i"><u id="prc1i"></u></ruby></rp>
      1. <button id="prc1i"><tr id="prc1i"><u id="prc1i"></u></tr></button><nav id="prc1i"></nav>
      2. <rp id="prc1i"></rp>
        "
        • 021-61310576
        您的位置: 首页 > 新闻中心 > 泵技术知识

        进口 美国泵标准ANSI

        作者:进口阀门 日期:2019-12-06 点击:838

        ASTM在美国国内及国外都享有很高的声望,它所制定的石油化工和采油机械技术标准被许多国家采用彩票在线平台登录网站,它是美国商业部和美国贸易委员会承认的石油机械认证机构彩票在线平台登录网站。目前,在包括勘探和生产、运输彩票在线平台登录网站、精炼和市场营销等各个方面拥有来自全世界的会员彩票在线平台登录网站。今天ASTM已发展成为不仅在美国,而且越来越多地成为世界石油工业活动的有机组成部分彩票在线平台登录网站。

        编号

        中文名称

        英文名称

        ANSI B93.95M-1987

        液压气动用容积式泵、马达、整体传输.稳态性能的测量

        Hydraulic Fluid Power - Positive Displacement Pumps, Motors, and Integral Transmissions - Determination of Steady-State Performance

        ANSI Z21.40.1-1996

        燃气彩票在线平台登录网站、热激活空气调节和热泵设施

        Gas-Fired, Heat Activated Air Conditioning and Heat Pump Appliances

        ANSI Z21.40.1a-1997

        燃气激活空气调节和热泵器具的安全性和结构

        Safety and Construction of Gas-Fired, Heat Activated Air-Conditioning and Heat Pump Appliances

        ANSI Z21.40.2-1996

        燃气彩票在线平台登录网站、工作激活空气调节和热泵器具(内然)

        Gas-Fired, Work Activated Air-Conditioning and Heat Pump Appliances (Internal Combustion)

        ANSI Z21.40.2a-1997

        燃气、工作激活空气调节和热泵器具(CGA 2.92a)

        Gas-Fired, Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2.92a)

        ANSI Z21.40.4-1996

        燃气、空气调节和热泵器具的性能试验和额定值

        Performance Testing and Rating of Gas-Fired, Air Conditioning and Heat Pump Appliances

        ANSI Z21.40.4a-1997

        燃气、空气调节和热泵器具的性能试验和额定值(CGA 2.94a)

        Performance Testing and Rating of Gas-Fired, Air-Conditioning and Heat Pump Appliances (same as CGA 2.94a)

        ANSI/AAMI ID26-2004

        医疗电气设备.2部分:注液泵和控制器安全的特殊要求

        Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Infusion Pumps and Controllers

        ANSI/API 610-2002

        一般精炼设备用离心泵

        Centrifugal Pumps for General Refinery Services

        ANSI/API 682-2004

        .离心泵和回转泵的轴密封装置

        Pumps - Shaft Sealing Systems for Centrifugal and Rotary Pumps

        ANSI/API 685-1999

        用于石油彩票在线平台登录网站、重型化工和燃气行业的非密封离心泵

        Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas Industry Services

        ANSI/API RP-11S1-1998

        电潜水泵拆卸报告

        Electrical Submersible Pump Teardown Report

        ANSI/API RP11S 1-1987

        电动潜水泵拆卸报告

        Electrical Submersible Pump Teardown Report

        ANSI/ARI 310/380-1993

        组装终端的空气调节装置与蒸汽泵

        Packaged Terminal Air-Conditioners and Heat Pumps

        ANSI/ARI 330-1993

        地热源闭合循环热泵

        Ground Source Closed-Loop Heat Pumps

        ANSI/ARI 340/360-2000

        商用和工业用统一空气调节和热泵设备

        Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment

        ANSI/ARI 500-2001

        空气调节和热泵设施用不同容积的容积式冷冻剂压缩机和压缩机部件

        Variable Capacity Positive Displacement Refrigerant Compressors and Compressor Units for Air-Conditioning and Heat Pump Applications

        ANSI/ARI 870-2001

        直接土工交换热泵

        Direct GeoExchange Heat Pumps

        ANSI/ARI/ASHRAE/ISO 13256-1-1998

        水源热力泵.性能试验和额定值测量.1部分:-空气和盐水-空气热力泵

        Water-Source Heat Pumps - Testing and Rating for Performance: Part 1 - Water-to-Air and Brine-to-Air Heat Pumps

        ANSI/ARI/ASHRAE/ISO 13256-2-1998

        水源热力泵.性能试验和额定值测量.2部分:-水和盐水-水热力泵

        Water-Source Heat Pumps - Testing and Rating for Performance: Part 2 - Water-to-Water and Brine-to-Water Heat Pumps

        ANSI/ASHRAE 116-1995

        单体空调和热泵季节热效率的试验方法

        Seasonal Efficiency of Unitary Air Conditioners and Heat Pumps, Methods of Testing for

        ANSI/ASHRAE 37-2005

        电动整体空调和热泵设备的额定值试验方法

        Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment

        ANSI/ASHRAE Standard116-1995

        单式空调器和热泵的季节效应试验方法

        Seasonal Efficiency of Unitary Air Conditioners and Heat Pumps, Methods of Testing for

        ANSI/ASME A112.18.3-2002

        泵固定件接头中防回流装置和系统的性能要求

        Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings

        ANSI/ASME B73.1M-2001

        化工用卧式端吸离心泵规范

        Horizontal End Suction Centrifugal Pumps for Chemical Process, Specifications for

        ANSI/ASME B73.2M-2003

        化工用立式直列式离心泵规范

        Vertical In-Line Centrifugal Pumps for Chemical Process, Specifications for

        ANSI/ASME B73.5M-1995

        化工用热塑性和热固性聚合材料卧式端吸离心泵规范

        Specification for Thermoplastic and Thermoset Polymer Material Horizontal End Suction Centrifugal Pumps for Chemical Process

        ANSI/ASME PTC18-2002

        水轮机和泵.涡轮机

        Hydraulic Turbines and Pump - Turbines

        ANSI/ASTM D2809-1999

        发动机冷却剂对铝泵的气蚀和侵蚀特性测试方法

        Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps with Engine Coolants

        ANSI/ASTM D3829-2002

        发动机油的边界泵抽温度的预测试验(05.02)

        Predicting the Borderline Pumping Temperature of Engine Oil, Test for (05.02)

        ANSI/ASTM D6813a-2002

        活塞泵的液压流体性能的评定指南

        Guide for the Performance Evaluation of Hydraulic Fluids for Piston Pumps

        ANSI/ASTM D6898-2003

        用喷油泵装置评价柴油润滑性的试验方法

        Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig

        ANSI/ASTM D6973-2005

        高压定容叶轮泵中石油液压液耐磨特性指示的试验方法

        Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

        ANSI/ASTM D7043a-2004

        固定容量离心泵中石油和非石油液压液磨损特性指示的试验方法

        Test Method for Indicating Wear Characteristics of Petroleum and Non-petroleum Hydraulic Fluids in a Constant Volume Vane Pump

        ANSI/ASTM F1510-2001

        商用船只旋转式正排量泵规范

        Specification for Rotary Positive Displacement Pumps, Commercial Ships Use

        ANSI/ASTM F1718-2001

        旋转式正排量燃料泵规范

        Specification for Rotary Positive Displacement Fuel Pumps

        ANSI/ASTM F998-2004

        船用离心泵规范

        Specification for Centrifugal Pump, Shipboard Use

        ANSI/HI 1.1-1.2-2000

        离心泵.术语、定义、应用和操作

        Centrifugal Pumps - Nomenclature, Definitions, Application and Operation

        ANSI/HI 1.3-2000

        离心泵.水平基板设计

        Centrifugal Pumps - Horizontal Baseplate Design

        ANSI/HI 1.4-2000

        离心泵.命名彩票在线平台登录网站、定义、应用和操作

        Centrifugal Pumps - Nomenclature, Definitions, Application and Operation

        ANSI/HI 1.6-2000

        离心泵测试

        Centrifugal Pump Test

        ANSI/HI 10.1-10.5-2004

        风动泵的名称、定义彩票在线平台登录网站、应用和操作

        Air-Operated Pumps for Nomenclature, Definitions, Application, and Operation

        ANSI/HI 10.6-2004

        风动泵的试验

        Air-Operated Pump Tests

        ANSI/HI 11.6-2001

        潜水泵测试

        Submersible Pump Tests

        ANSI/HI 12.1-12.6-2005

        离心式淤浆泵的名词定义、应用和操作

        Rotodynamic Centrifugal Slurry Pumps For Nomenclature Definitions, Applications and Operation-2005

        ANSI/HI 2.1-2.2-2000

        立式泵的命名和定义

        Vertical Pumps for Nomenclature and Definitions

        ANSI/HI 2.3-2000

        立式泵的设计和应用

        Vertical Pumps for Design and Application

        ANSI/HI 2.4-2000

        立式泵.术语、定义彩票在线平台登录网站、应用和操作

        Vertical Pumps for Nomenclature, Definitions, Application and Operation

        ANSI/HI 2.6-2000

        立式泵测试

        Vertical Pump Test

        ANSI/HI 3.1-3.5-2000

        旋转式泵.术语、定义、应用和操作

        Rotary Pump Standards for Nomenclature, Definitions, Applications and Operation

        ANSI/HI 3.6-2000

        旋转式泵测试

        Rotary Pump Test

        ANSI/HI 4.1-4.6-2000

        无密封旋转式泵.术语、定义、应用、操作和测试

        Sealless Rotary Pumps - Nomenclature, Definitions, Applications, Operation and Test

        ANSI/HI 5.1-5.6-2000

        无密封离心泵.术语、定义、应用、操作和测试

        Sealless Centrifugal Pumps for Nomenclature, Definitions, Application, Operation and Test

        ANSI/HI 6.1-6.5-2000

        循环泵.术语、定义、应用和操作

        Reciprocating Power Pump Standards for Nomenclature, Definitions, Application, and Operation

        ANSI/HI 6.6-2000

        循环泵测试

        Reciprocating Pump Test

        ANSI/HI 8.1-8.5-2000

        蒸汽直动活塞泵.术语、定义、应用和操作

        Direct Acting Steam Pumps for Nomenclature, Definitions, Application, and Operation

        ANSI/HI 9.1-9.5-2000

        泵通用标准.类型、定义、应用和声测量

        General Pump Standards for Types, Definitions, Application, and Sound Measurements

        ANSI/HI 9.3.3-1997

        :聚合材料选择

        Pumps: Polymer Material Selection

        ANSI/HI 9.6.2-2001

        离心泵和立式泵.最大喷嘴负荷

        Centrifugal and Vertical Pumps for Allowable Nozzle Loads

        ANSI/HI 9.6.3-1997

        .允许操作范围

        Pumps - Allowable Operating Region

        ANSI/HI 9.6.4-2000

        离心泵和立式泵.振动测量和容许值

        Centrifugal and Vertical Pumps for Vibration Measurement and Allowable Values

        ANSI/HI 9.6.5-2000

        离心泵和立式泵.状况监测

        Centrifugal and Vertical Pumps for Condition Monitoring

        ANSI/HI 9.6.7-2004

        液体粘度对旋转动态(离心和立式)泵性能的影响

        Effects of Liquid Viscosity on Rotodynamic (Centrifugal and Vertical) Pump Performance

        ANSI/HI 9.8-1998

        泵入口设计

        Pump Intake Design

        ANSI/IEEE 1017-2004

        潜水电泵电缆的现场试验推荐规范

        Recommended Practice for Field Testing Electric Submersible Pump Cable

        ANSI/IEEE 1018-2004

        规定潜水电泵电缆用推荐规程.乙烯-丙烯橡胶绝缘

        Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber Insulation

        ANSI/IEEE 1019-2004

        规定潜水电泵电缆用推荐规程.聚丙烯绝缘

        Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation

        ANSI/NFPA 1911-2002

        消防部门的泵吸装置的试验

        Testing Fire Department Pumping Apparatus

        ANSI/SAE J1668-1993

        柴油机燃油喷射泵的试验

        Diesel Engines-Fuel Injection Pump Testing

        ANSI/SAE J626-1998

        柴油喷射.燃料喷射泵用端头安装法兰

        Diesel Fuel Injection - End Mounting Flanges for Fuel Injection Pumps

        ANSI/TIA-455-212-2000

        FOTP212.IEC 61290-6-1.光纤放大器.基础规范.6-1部分:泵泄漏参数的测试方法.光学多路分解器

        FOTP212 - IEC 61290-6-1 - Optical Fibre Amplifiers - Basic Specification Part 6-1: Test Methods for Pump Leakage Parameters- Optical Demultiplexer

        ANSI/TIA/EIA 455-212-2000

        FOTP212-IEC 61290-6-1-光纤放大器. 基本规范.6-1部分:泵泄漏参数测试方法.光多路分配器

        FOTP212 - IEC 61290-6-1 - Optical Fibre Amplifiers - Basic Specification Part 6-1: Test Methods for Pump Leakage Parameters- Optical Demultiplexer

        ANSI/UL 1247-2004

        驱动离心消防泵用柴油发动机

        Diesel Engines for Driving Centrifugal Fire Pumps

        ANSI/UL 1450-2005

        电动空气压缩机、真空泵和涂漆设备的安全标准

        Standard for Safety for Motor-Operated Air Compressors, Vacuum Pumps, and Painting Equipment

        ANSI/UL 1453-2004

        水加热器、电增压泵和商用贮水箱

        Water Heaters, Electric Booster and Commercial Storage Tank

        ANSI/UL 1478-2004

        消防水泵减压阀

        Fire Pump Relief Valves

        ANSI/UL 218-2005

        消防泵控制器的安全标准

        Standard for Safety for Fire Pump Controllers

        ANSI/UL 218A-2004

        柴油发动机驱动的离心消防泵用蓄电池接触器

        Battery Contactors for Use in Diesel Engines Driving Centrifugal Fire Pumps

        ANSI/UL 448-2004

        消防泵

        Pumps for Fire Protection Service

        ANSI/UL 51-1999

        用于液化石油气和无水氨的动力操作泵

        Power-Operated Pumps for Anhydrous Ammonia and LP-Gas

        ASME B5.28-1971

        机床润滑和冷却泵的装配尺寸

        (Mounting dimensions of lubricating and coolant pumps for machine tools)

        ASME B73.1-2001

        化工用卧式端吸离心泵规范

        (Specification for horizontal end suction centrifugal pumps for chemical process)

        ASME B73.2M-1991

        化工用立式直列式离心泵规范

        (Specification for vertical in-line centrifugal pumps for chemical process)

        ASME B73.5M-1995

        化工处理用热塑和热固性聚合材料制水平端头吸入式离心泵规范

        (Specification for thermoplastic and thermoset polymer material horizontal end suction centrifugal pumps for chemical process)

        ASME PTC 7-1949

        往复式蒸汽驱动活塞泵

        (Reciprocating steam-driven displacement pumps)

        ASME PTC 7.1-1962

        活塞泵

        (Displacement pumps)

        ASME PTC 8.2-1990

        离心泵

        (Centrifugal pumps)

        ASME PTC 9 Erratum-1972

        容积式压缩机,真空泵和鼓风机.正误表

        (Displacement compressors, vacuum pumps, and blowers; Erratum)

        ASME PTC 9-1970

        容积式压缩机,真空泵和鼓风机

        (Displacement compressors, vacuum pumps, and blowers)

        ASME Y14.40.9-2002

        图示用图形符号.9部分:泵彩票在线平台登录网站、压缩机和风扇

        (Graphical symbols for diagrams - Part 9: Pumps, compressors and fans)

        ASTM D 2809-2004

        带有发动机冷却剂的铝泵的气蚀和侵蚀特性的标准试验方法

        Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants

        ASTM D 3245-2003

        工业燃油的泵抽油能力标准试验方法

        Standard Test Method for Pumpability of Industrial Fuel Oils

        ASTM D 3829-2002

        预测发动机油边界泵送温度的标准试验方法

        Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil

        ASTM D 3890-2005

        起动机械泵计量器的行程数的标准试验方法

        Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser

        ASTM D 4041-2005

        测定手动泵分配器喷射模式的标准试验方法

        Standard Test Method for Determining Spray Patterns of Manually Operated Pump Dispensers

        ASTM D 4133-1982

        用泵取样可繁殖海洋浮游生物的标准实施规程

        Standard Practice for Sampling Phytoplankton with Pumps

        ASTM D 4333-2005

        机械泵计量器元件不兼容性的标准试验方法

        Test Method for the Compatibility Resistance of Mechanical Pump Dispenser Components

        ASTM D 4334-2005

        测定机械泵计量器浸入管保持力的标准试验方法

        Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser

        ASTM D 4335-1999

        机械泵加注器元件保持力测定的标准试验方法

        Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser

        ASTM D 4336-2005

        测定机械泵计量器每行程输出功率的标准试验方法

        Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser

        ASTM D 5337-2004

        小型取样泵校正用流率的标准规程

        Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps

        ASTM D 6034-1996

        通过一连续比率的泵试验对限制性含水层内生产井效率测定的标准试验方法

        Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test

        ASTM D 6534-2005

        测定机械泵分配器最大推动力的标准试验方法

        Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser

        ASTM D 6535-2005

        测定机械泵计量器浸入管长度的标准试验方法

        Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser

        ASTM D 6536-2000

        测定机械泵计量器浸入管长度的标准试验方法

        Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser

        ASTM D 6633-2005

        机械泵分配器的基本功能稳定性的标准试验方法

        Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser

        ASTM D 6654-2005

        机械泵分配器基本储存稳定性的标准试验方法

        Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser

        ASTM D 6655-2001

        与机械泵分配器有关的标准术语

        Standard Terminology Relating to Mechanical Pump Dispensers

        ASTM D 6813a-2002

        活塞泵的液压液性能评定的标准指南

        Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps

        ASTM D 6834-2002

        测定有机械泵分配器的包装的产品泄漏率的标准试验方法

        Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser

        ASTM D 6898-2003

        用喷油泵装置评价柴油润滑性的标准试验方法

        Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig

        ASTM D 6973-2005

        高压定容叶轮泵中石油液压液磨损特性指示的标准试验方法

        Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

        ASTM D 7043a-2004

        定容叶轮泵中石油和非石油液压液的磨损特性指示的标准试验方法

        Standard Test Method for Indicating Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump

        ASTM E 1198-1987

        用泵对浮游生物取样的标准实施规程

        Standard Practice for Sampling Zooplankton with Pumps

        ASTM E 295-1982

        测量油扩散泵速度的试验方法

        Standard Test Method for Measured Speed of Oil Diffusion Pumps

        ASTM F 1510-2001

        商业船用旋转式正排量泵标准规范

        Standard Specification for Rotary Positive Displacement Pumps, Commercial Ships Use

        ASTM F 1607-1995

        漏油响应泵试验性能数据报告的标准指南

        Standard Guide for Reporting of Test Performance Data for Oil Spill Response Pumps

        ASTM F 1718-2001

        旋转式正排量蒸馏燃油泵标准规范

        Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps

        ASTM F 1830-1997

        评价玻璃试管内血泵用血液的选择的标准操作规程

        Standard Practice for Selection of Blood for In Vitro Evaluation of Blood Pumps

        ASTM F 1841-1997

        连续流动血泵里溶血评定的标准操作规程

        Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps

        ASTM F 998-2004

        船用离心泵标准规范

        Standard Specification for Centrifugal Pump, Shipboard Use

        UL 1004A-2001

        消防泵电动机

        (Fire pump motors )

        UL 1113-2004

        船舶不可燃液体用电动泵

        (Electrically operated pumps for nonflammable liquids, marine )

        UL 1130-1999

        船用机械和电子控制燃油泵

        (Mechanically and electrically operated fuel pumps for marine use )

        UL 1207-2001

        危险场所用污水泵

        (Sewage pumps for use in hazardous (classified) locations )

        UL 1247-1995

        防火离心泵驱动用柴油机

        (Diesel engines for driving centrifugal fire pumps )

        UL 1450-2003

        电动空气压缩机彩票在线平台登录网站、真空泵和喷漆设备

        (Motor-operated air compressors, vacuum pumps, and painting equipment)

        UL 1478-1995

        消防泵减压阀

        (Fire pumps relief valves )

        UL 218-1996

        防火泵控制器

        (Fire pump controllers )

        UL 218A-2004

        柴油机中驱动离心点火泵用电池接头标准

        (Standard for battery contactors for use in diesel engines driving centrifugal fire pumps )

        UL 343-1997

        燃油设备用泵

        (Pumps for oil-burning appliances )

        UL 448-1994

        消防装置用泵

        (Pumps for fire-protection service )

        UL 51-2002

        使用无水液氨和液化石油气的动力操纵泵

        Power-operated pumps for anhydrous ammonia and LP-gas 

        UL 778-2002

        电动水泵

        (Motor-operated water pumps )

        UL 79-1996

        石油产品输送系统用动力泵

        Power-operated pumps for petroleum dispensing products 

        相关文章标准

        日本Japan阀门标准JIS http://www.assassingrl.com/newsdetail_507430.html

        世界各国阀门标准代号http://www.assassingrl.com/newsdetail_1979672.html

        进口阀门,美标API标准http://www.assassingrl.com/newsdetail_1979673.html

        离心泵生产API标准http://www.assassingrl.com/newsdetail_1931958.html

        增压泵生产标准http://www.assassingrl.com/newsdetail_1956731.html

        磁力泵生产标准http://www.assassingrl.com/newsdetail_1869919.html

        进口英国泵生产标准BShttp://www.assassingrl.com/newsdetail_1981762.html

        分享到:

        上一条:进口美国AMCO减压阀1803

        下一条:进口美国石油阀门标准API

        彩票在线平台登录网站
      3. <dd id="prc1i"><big id="prc1i"></big></dd>
        <dd id="prc1i"><track id="prc1i"></track></dd>
        <rp id="prc1i"><acronym id="prc1i"></acronym></rp>
      4. <tbody id="prc1i"><noscript id="prc1i"></noscript></tbody>
        <span id="prc1i"><track id="prc1i"><sup id="prc1i"></sup></track></span>

        1. <span id="prc1i"><pre id="prc1i"><sup id="prc1i"></sup></pre></span>

        2. <rp id="prc1i"><ruby id="prc1i"><u id="prc1i"></u></ruby></rp>
          1. <button id="prc1i"><tr id="prc1i"><u id="prc1i"></u></tr></button><nav id="prc1i"></nav>
          2. <rp id="prc1i"></rp>